Precision hardware parts processing before the basic steps of the operation essentials
Release time:
2024-07-09
The shape of the products processed by the precision hardware accessories is also different. Some of the processing steps are simple, but some of the processing steps are cumbersome. The process used also needs to be customized according to the processing requirements. Let's talk about the operation specifications that precision hardware parts processing, whether it is cumbersome workpieces or simple workpieces, need to know.
The shape of the products processed by the precision hardware accessories is also different. Some of the processing steps are simple, but some of the processing steps are cumbersome. The process used also needs to be customized according to the processing requirements. Let's talk about the operation specifications that precision hardware parts processing, whether it is cumbersome workpieces or simple workpieces, need to know.
1. When processing products. The operator should maintain the correct posture and have enough energy to carry out perfunctory work. If you feel unwell, for personal safety, you must leave your post and report to the workshop supervisor and superior leadership. When operating, we should pool our wisdom, do not gossip, and perform our duties. Operators shall not operate in a state of irritability and fatigue to prevent accidents and ensure safe operation of personal safety. Before entering the job, some employees should check whether their clothes meet the job requirements. It is forbidden to wear slippers, high-heeled shoes and clothes that affect safety. People with long hair should wear helmets.
2. Before the machine runs, check whether the moving parts are filled with lubricating oil, then start and check whether the clutch and brake are normal, and let the machine idle for 1-3 minutes. When the machine fails, stop the operation.
3. When replacing the mold, the power should be turned off first. After the punch movement part stops running, the mold can be installed and adjusted. After installation, move the flywheel by hand for two test washes. In order to prevent unnecessary collision between the machine and the product to be processed, it is necessary to check whether the upper and lower dies are symmetrical and reasonable, whether the screws are firm and the edge holder is reasonable.
4. When the mechanical equipment is running, stop putting your hand on the slider area and stop taking and placing the workpiece by hand. When removing and placing workpieces in the mold, items that meet the specifications must be used. If any abnormal noise failure is found in the machine, the power switch should be turned off immediately for inspection. After the machine is started, one person shall transport the material and operate the machine. Others must not press the electrical equipment and step on the pedals. For the safety of others, it is not allowed to put your hands on the operating area of the machine and touch the moving parts of the machine with your hands,
The above is a process operation specification on the basis of precision hardware accessories processing. However, because the products processed by precision hardware accessories are not consumer goods, they are supporting products for industrial production. There are some semi-finished products. A small proportion of precision hardware products are consumer goods in the East and West. Such as screws, screwdrivers, wrenches, fishing gear, etc. Precision hardware accessories are mechanical parts made of precision hardware, and some small hardware products can be used as auxiliary tools.
Related News
QR Code
Dongwei Precision Parts
DONGWEI
Tel.: +86513-82195300
Contact: Mr. Dong
Mobile: +8613861961010
E-mail: ntdwdj@163.com
Address: No. 700 Nanhai East Road, Haimen City, Jiangsu
Copyright © 2024 Nantong Dongwei Precision Parts Co. Ltd.